Crimping sleeve T-form 414.044.331
Characteristics
For hexagonal pressing
| Article No. | 414.044.331 |
|---|---|
| E-Number | 156 071 580 |
| Technical specification | |
| Approved class H / N (EN 62561-1) | H |
| Suitable for use in soil | ok |
| Material | Cu |
| KZ size of insert for crimp tool | 12 |
| Wire diameter | 8 mm |
| Nominal cross section conductor | 35 mm² |
| Suitable for solid cores | Yes |
| Voltage level | Up to 15 kV |
| Number of branches | 2 |
| Model | Standard version |
| Nominal cross section | 35 mm² |
| Useful for stranded conductors | Yes |
| Surface protection | blank |
| Sleeve form | Short |
| For pull protected connections | No |
| Suitable for round conductors | Yes |
| Type of connection | T-connector |
| Suitable for fine strand conductors | No |
| Insulation | None |
| Oil stop/centre bar | No |
| Commercial specification | |
| Customs number | 85389000 |
| country of origin | CE* |
| Logistic specification | |
| VPE Weight | 1.293 kg |