Characteristics
The gas conductor is the only surge protection component, based on the low capacity, which can be applied effective in a very high frequency range (up to few GHz). The operating voltage of the gas conductor will be defined at the production (90V up to 600V).
| Article No. | 296.076.123 |
|---|---|
| E-Number | 808 401 910 |
| Technical specification | |
| Plug connector model A | BNC M/F |
| Connection 1 | BNC, 50 Ohm |
| Impulse current [Iimp]_(10/350) | 2.5 kA |
| Nominal discharge surge current (8/20) | 20 kA |
| Nominal load current | 10 A |
| Response time [ta] | ≤100 ns |
| Temperature range | -40 - 80 °C |
| Signaling on the device | None |
| Frequency | 0 - 4000 Hz |
| Frequency range | 0 - 4000 MHz |
| With remote signalling contact | No |
| Nominal voltage DC | 90 V |
| Mounting method | Connector/Kabeladapter |
| Discharge current max. [Imax] | 20 kA |
| Explosion-tested version | No |
| Voltage protection level max. (by In) [Up] | <0.65 kV |
| Operation voltage max. [Uc] | 90 |
| Degree of protection (IP) | IP65 |
| Nominal discharge current [In] | 5 |
| Standards | |
| Test standards International | IEC 61643-21 |
| Test standards USA | UL497C, UL497E |
| Test standards Europe | EN 61643-21 |
| Commercial specification | |
| Customs number | 85363000 |
| country of origin | CE* |
| Logistic specification | |
| VPE Weight | 0.118 kg |
